manualshive.com logo in svg

Nera WiLink-I 3000, System Manual

The Nera WiLink-I 3000, a cutting-edge wireless communication device, is accompanied by a comprehensive System Manual for user convenience. This invaluable manual can be easily downloaded for free from our website, enabling users to access detailed instructions and maximize their experience with this exceptional product.

Share
Download
background image

116

Operation

Chapter 4 - Operation and Administration

from the served SUs. Optimal values are calculated separately for the uplink and 
downlink for each SU, taking into account also the applicable QoS requirements. 
MAP messages transmitted to the SUs include information on the uplink rate that 
should be used by each SU for its next transmission.

The Basic Rate is the minimum rate to be used by the Multirate algorithm. This is 
also the rate to be used for downlink broadcasts and multicasts. Broadcasts and 
multicasts messages are not acknowledged, so that the ARQ mechanism cannot 
be used and there is no way to guarantee that all intended recipients will receive 
them properly. In addition, multicasts and broadcasts are sent to multiple 
recipients with different link qualities. Therefore, it is preferable to use a relatively 
low rate for these transmissions, thus reducing the probability of errors and 
increasing the likelihood that all intended recipients will receive them properly.

In the uplink, this is the rate to be used by SUs for non-scheduled transmissions, 
such as during the contention period.

The Basic Rate is also the initial rate to be used by the algorithm for each new SU 
that joins the cell when the Multirate algorithm is enabled.

When the Multirate algorithm is disabled, communication with connected SUs will 
continue using the last uplink and downlink rates selected by the Multirate 
algorithm. The Set Rates option in the SU (see 

Section 4.9.6.3.4.2

), which 

becomes available only when the Multirate algorithm is disabled in the AU, 
enables setting the Uplink Current Rate and the Downlink Current Rate to any of 
the values listed in 

Figure 4-5

.

The multirate algorithm chooses dynamically between 8 rates. These are also the 
rates that can be configured for the Basic Rate parameters.

The Multirate menu enables viewing/updating the following parameters:

Table 4-5: Rates (Modulation Schemes and Coding)

No.

Rate

1

BPSK 1/2

2

BPSK 3/4 

3

QPSK 1/2 

4

QPSK 3/4 

5

QAM16 1/2 

6

QAM16 3/4 

7

QAM64 2/3

8

QAM64 3/4 

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments

Related manuals for WiLink-I 3000

Pacbrake 10475 Installation Manual preview
10475
Brand: Pacbrake Pages: 9
Kargo Master 40020 Assembly Manual preview
40020
Brand: Kargo Master Pages: 6
OBH Nordica 9960 Instruction Manual preview
9960
Brand: OBH Nordica Pages: 28
Da-Lite TENSIONED CONTOUR ELECTROL Instruction Manual preview
TENSIONED CONTOUR ELECTROL
Brand: Da-Lite Pages: 8
Dacor ER30DSRSCH Installation Instructions preview
ER30DSRSCH
Brand: Dacor Pages: 4
Eclipse AVN 2210p mkII Operation Manual preview
AVN 2210p mkII
Brand: Eclipse Pages: 6
Manfrotto 331 Quick Start Manual preview
331
Brand: Manfrotto Pages: 2
Paradyne 7610 Overview preview
7610
Brand: Paradyne Pages: 2
La Crosse Technology TX5 Instruction Manual preview
TX5
Brand: La Crosse Technology Pages: 6
Xerox 6130N - Phaser Color Laser Printer Instruction Sheet preview
6130N - Phaser Color Laser Printer
Brand: Xerox Pages: 2
Varta element Series Add-On Instructions preview
element Series
Brand: Varta Pages: 132
Aastra ETIQUETTE MEMOIRE M I740N Schematic Diagram preview
ETIQUETTE MEMOIRE M I740N
Brand: Aastra Pages: 1
TBB power Energy Hub EH128L User Manual preview
Energy Hub EH128L
Brand: TBB power Pages: 24
Hama 00183354 Operating Instruction preview
00183354
Brand: Hama Pages: 38
Broil King COB-H Manuallines & Suggestions preview
COB-H
Brand: Broil King Pages: 2
ST STEVAL-IOD04KT1 User Manual preview
STEVAL-IOD04KT1
Brand: ST Pages: 13
Burley Ski Kit Owner'S Instruction & Safety Manual preview
Ski Kit
Brand: Burley Pages: 16
Coby 180BW Instruction Manual preview
180BW
Brand: Coby Pages: 16

Brands by name

Popular brands

Load more brands