Nera WiLink-I 3000, System Manual

Page: 112 / 250

92 Operation
Chapter 4 - Operation and Administration
If remote management for the Data port is disabled, then the unit can be managed
by any PC on any of the following subnets (provided the PC is defined as an
Authorized Manager):
A
The local subnet of the Management port (defined by the Management Port IP
Address and Management Port Subnet Mask parameters).
B
The local subnet of the Data port (defined by the Data Port IP Address and
Data Port Subnet Mask parameters).
C
Any subnet reachable via the Gateway of the Management port (if defined).
Note that in this case the Static Route (if defined) is ignored, and the defined
Gateway becomes the default Gateway, enabling remote management by any
PC reachable via the Gateway.
If remote management is enabled for both the Data Port and the Management
port, then the unit can be managed by any PC on any of the following subnets
(provided the PC is defined as an Authorized Manager):
A
The local subnet of the Management port (defined by the Management Port IP
Address and Management Port Subnet Mask parameters).
B
The local subnet of the Data port (defined by the Data Port IP Address and
Data Port Subnet Mask parameters).
C
Any subnet reachable via the default Gateway of the Data port (if Data Port
Gateway is defined).
D
The remote Static Route subnet (defined by the Management Port Dest Subnet
and Management Port Dest Subnet Mask parameters) reachable via the
Gateway of the Management port.
NOTE
To prevent the undesired situation where remote management traffic is unintentionally disabled in
both the Management and Data ports, the Management Port Management Traffic Enable/Disable
parameter will be automatically forced to Enabled upon disabling the Data Port Management
Traffic, and vice versa.