manualshive.com logo in svg

Nera WiLink-I 3000, System Manual

The Nera WiLink-I 3000, a cutting-edge wireless communication device, is accompanied by a comprehensive System Manual for user convenience. This invaluable manual can be easily downloaded for free from our website, enabling users to access detailed instructions and maximize their experience with this exceptional product.

Share
Download
background image

Services Menu

WiLink-I Modular Base Station System Manual

153

k=100 x (bytes transferred-CIR)/(MIR-CIR) is calculated for each 1 second 
interval. In BE CIR = 0. The EIR Utilization equals the average of k over the 
last 15 seconds, and may range from 0 to 100. The value is updated every 15 
seconds.

¢

Average Throughput (bits/s): The average throughput, in bits/second, 
measured for this connection over the last 15 seconds. The value is updated 
every 15 seconds.

4.10.4.4

Service Profiles

Each Service Profile defines the properties of the defined service. Each Service 
Profile is associated with specific Forwarding Rule and Priority Classifier (Priority 
Classifiers are not applicable to Voice Service Profiles). 

The Service Profile menu enables defining new Service Profiles, viewing or editing 
details of previously defined Service Profiles and removing Service Profiles from 
the database.

The Service Profiles database can hold up to 1024 Service Profiles.

The configurable Service Profile's parameters are:

4.10.4.4.1

Service Profile Name

A Service Profile Name consists of up to 32 printable characters.

4.10.4.4.2

Service Type

The Service Type of the Service Profile. The Service Type parameter is configurable 
only when defining a new Service Profile (Add). It is not changeable.

The currently available Service Type options are:

1 - L2   

2 - PPPoE 

3 - Voice

For more details refer to 

Section 4.10.1.2

.

4.10.4.4.3

VLAN Transparency Mode

The VLAN Transparency Mode defines the method of transferring packets to the 
operator's upstream network. 

When set to On, data packets sent from the Base Station to the backbone will be 
transferred transparently. The VPL ID parameter is not applicable to Service 
Profiles with VLAN Transparency Mode On. 

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments

Related manuals for WiLink-I 3000

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
DataCard SP55 Plus Supplementary Manual preview
SP55 Plus
Brand: DataCard Pages: 2
DataCard CE870 Quick Install Manual preview
CE870
Brand: DataCard Pages: 24
DataCard ImageCard series Supplementary Manual preview
ImageCard series
Brand: DataCard Pages: 2
DataCard ImageCard series Datasheet preview
ImageCard series
Brand: DataCard Pages: 2
Yolin YL80C Manual preview
YL80C
Brand: Yolin Pages: 25
EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
F&F DRM-02 Instructions Manual preview
DRM-02
Brand: F&F Pages: 8
Gainsborough K320 Instructions For Use preview
K320
Brand: Gainsborough Pages: 2
Manfrotto 331 Quick Start Manual preview
331
Brand: Manfrotto Pages: 2
Paradyne 7610 Overview preview
7610
Brand: Paradyne Pages: 2
La Crosse Technology TX5 Instruction Manual preview
TX5
Brand: La Crosse Technology Pages: 6
PASCO PS-3201 Reference Manual preview
PS-3201
Brand: PASCO Pages: 8
Velleman MM102 User Manual preview
MM102
Brand: Velleman Pages: 2
Velleman 959 Operating Manual preview
959
Brand: Velleman Pages: 9
Vega VEGABAR 81 Quick Setup Manual preview
VEGABAR 81
Brand: Vega Pages: 20
Vega SOLITRAC 31 Operating Instructions Manual preview
SOLITRAC 31
Brand: Vega Pages: 88
Vega MINITRAC 31 Quick Setup Manual preview
MINITRAC 31
Brand: Vega Pages: 28

Brands by name

Popular brands

Load more brands