manualshive.com logo in svg

Nera WiLink-I 3000, System Manual, Page: 53 / 250

Share
Download
Nera WiLink-I 3000 System Manual Download Page 53

Installing the Base Station Equipment

WiLink-I Modular Base Station System Manual

33

2.2

Installing the Base Station Equipment

2.2.1

BST Installation Requirements

2.2.1.1

Packing List

¢

Base Station Chassis:

¯

WiLink-I-BST-SH Base Station Chassis

¯

WiLink-I-BST-AVU Air Ventilation Unit (installed)

¯

Cables Tray kit

¯

2.5 meter DC cable

¢

WiLink-I-BST-PIU (1 or 2 per chassis) Power Interface Unit(s)

¢

2.5 meter DC cable (for a redundant PIU. One cable is supplied with each 
chassis)

¢

WiLink-I-BST-PSU (up to 4 per chassis) Power Supply Unit(s)

¢

WiLink-I-BST-NPU Network Processing Unit and Monitor cable

¢

WiLink-I-BST-AU-IDU (up to 6 per chassis) Access Unit Indoor Unit(s)

2.2.1.2

Additional Installation Requirements

The following items are also required to install the BST:

¢

Ethernet cable (straight) for connecting the NPU to a Hub/Switch. 

¢

A grounding cable with appropriate terminations for connecting the chassis to 
the rack or another ground (earth) connection.

¢

For installation in a 21" ETSI rack: Two 21" ETSI rack adapters

NOTE

The maximum length of the Ethernet cable is 100m when operating at 100 Mbps and 70m when 
operating at 1 Gbps.

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments