manualshive.com logo in svg

Nera WiLink-I 3000, System Manual, Page: 213 / 250

Share
Download
Nera WiLink-I 3000 System Manual Download Page 213

Completing the Software Upgrade (Switching Versions)

WiLink-I Modular Base Station System Manual 

193

A.3

Completing the Software Upgrade 

(Switching Versions)

After verifying successful upload of all software files, set the new version as the 
main version in each one of the upgraded system elements:

¢

SU(s): Select the SU that should be upgraded. Select 

Unit Control > SW 

Versions Control > Set as Main,

 and enter the name of the new SU SW file. The 

unit will reset automatically and will use the new version after power-up. 
Repeat the process for all SUs that should be upgraded.

¢

AU(s): Select the AU that should be upgraded. Select 

Unit Control > SW 

Versions Control > Set as Main,

 and enter the name of the new AU SW file. The 

unit will reset automatically. After power-up, the unit will use the new version. 
Repeat the process for all AUs that should be upgraded.

¢

NPU/ BST: Select 

Unit Control > SW Versions Control > Run from Shadow

. The 

system will reset automatically. After power-up, the NPU/ BST will run from 
the new version, that at this stage is still marked as the Shadow Version. To 
switch versions, select 

Unit Control > SW Versions Control > Set as Main

. 

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments