manualshive.com logo in svg

Nera WiLink-I 3000, System Manual

The Nera WiLink-I 3000, a cutting-edge wireless communication device, is accompanied by a comprehensive System Manual for user convenience. This invaluable manual can be easily downloaded for free from our website, enabling users to access detailed instructions and maximize their experience with this exceptional product.

Share
Download
background image

Services Menu

WiLink-I Modular Base Station System Manual

165

The L2 Filtering Rules menu enables defining new L2 Filtering Rule, viewing 
details of previously defined L2 Filtering Rules and removing L2 Filtering Rules 
from the database. It is not possible to edit the parameters of an existing L2 
Filtering Rule. The database can hold up to 255 L2 Filtering Rules. 

The configurable L2 Filtering Rule parameters are:

4.10.4.8.1.1 Rule Name

The name of the L2 Rule. The L2 Rule Name is a string of 1 to 32 printable 
characters.

4.10.4.8.1.2 MAC Address

The base MAC Address that is used together with the MAC Address Mask to define 
a range of MAC addresses. A string of 6 octets (where each octet is represented by 
two hexadecimal numbers) separated by dashes ("-"). An empty entry means 
"Any". An "Any" MAC Address means that the filter is defined only by the 
Ethertype field.

4.10.4.8.1.3 MAC Address Mask

The mask that is used together with the MAC Address to define a range of MAC 
addresses. A string of 6 octets (where each octet is represented by two 
hexadecimal numbers) separated by dashes ("-"). In a binary representation the 
string must comprise a series of contiguous binary '1's starting from the MSB, 
followed by a series of contiguous binary '0's (if the range includes more than a 
single address). The MAC Address Mask parameter is not applicable for an "Any" 
MAC Address.

4.10.4.8.1.4 MAC Address Direction

The direction (Source or Destination) of the MAC Address. Indicates whether the 
range defined by the MAC Address and MAC Address Mask is for the Source MAC 
Address field or the Destination MAC Address field in the Ethernet frame. The 
MAC Address Direction parameter is not applicable to "Any" MAC Address.

4.10.4.8.1.5 Ethertype

The Ethertype of the Ethernet frame. The Ethertype is defined by 4 hexadecimal 
digits. An empty entry means "Any" and is applicable only if a MAC Address range 
is defined (the combination of "Any" for both the MAC Address and Ethertype is 
not allowed).

4.10.4.8.2

L3/L4 Filtering Rules

An L3/L4 (Layer 3/Layer 4) Filtering Rule includes the IP Address and Protocol. A 
range of IP Addresses can be defined for either the Source or Destination IP 
Address field. It is possible to define "Any" for either the IP Address or Protocol 
field (but not for both fields). If the specified Protocol is either TCP (6) or UDP (17), 

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments

Related manuals for WiLink-I 3000

Cane Creek EC Installation Manuals preview
EC
Brand: Cane Creek Pages: 2
IFO 8263 Instruction Manual preview
8263
Brand: IFO Pages: 8
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Quark-Elec QK-AS08 Setup Manual preview
QK-AS08
Brand: Quark-Elec Pages: 2
Quark-Elec QK-AS07-0183 Setup Manual preview
QK-AS07-0183
Brand: Quark-Elec Pages: 2
Xerox 6130N - Phaser Color Laser Printer Instruction Sheet preview
6130N - Phaser Color Laser Printer
Brand: Xerox Pages: 2
Varta element Series Add-On Instructions preview
element Series
Brand: Varta Pages: 132
Imax EA/PS User Manual preview
EA/PS
Brand: Imax Pages: 3
Bose ShowMatch DeltaQ SMGSB Safety And Installation Manual preview
ShowMatch DeltaQ SMGSB
Brand: Bose Pages: 2
Magnus VPH-10P Owner'S Manual preview
VPH-10P
Brand: Magnus Pages: 6
FORM FIT HDW 1779 Installation Instructions preview
HDW 1779
Brand: FORM FIT Pages: 2
Hettich Accura Quick Start Manual preview
Accura
Brand: Hettich Pages: 2
DigiTech GSP-2101fc Owner'S Manual preview
GSP-2101fc
Brand: DigiTech Pages: 15
Fishman Powerbridge TSV Installation Manual preview
Powerbridge TSV
Brand: Fishman Pages: 2
Prorack K748 Fitting Instructions Manual preview
K748
Brand: Prorack Pages: 14
Temposonics GB Series Operation Manual preview
GB Series
Brand: Temposonics Pages: 25
77designz FREESOLO User Manual preview
FREESOLO
Brand: 77designz Pages: 2
Honda 08A28-0J6-800 Installation Instructions Manual preview
08A28-0J6-800
Brand: Honda Pages: 32

Brands by name

Popular brands

Load more brands