Nera WiLink-I 3000 System Manual Download Page 121

Page: 121 / 250

ODU Menu

WiLink-I Modular Base Station System Manual

101

4.7

ODU Menu

The ODU(s) must be defined prior to defining the relevant AU(s) and AU
Channel(s).

The ODU menu includes the following options:

Show Summary

Select

Add

4.7.1

Show Summary

Select this option to view the current status of all defined Radio Clusters.

For each defined Radio Cluster, the display includes the following information:

ID: ODU ID (1-24)

Associated Radio Cluster: The ID (1-6) defined for the associated Radio
Cluster.

Tx Power: The defined Tx Power in dBm units.

ODU Configured Band: The radio band configured for the ODU.

Admin Status: Enabled or Disabled.

For details on the parameters refer to

Section 4.7.4

Upon first power-up of the Base Station, 7 ODUs are defined automatically, with
ODU IDs from 1 to 7. The parameters of these automatically created ODUs are:

Associated Radio Cluster: NA

Tx Power: 28 dBm

ODU Configured Band: Not Defined

Admin Status: Enabled

Summary of Contents for WiLink-I 3000



























































































































































































































































Search results

Summary of Contents for WiLink-I 3000

Reviews:

Related manuals for WiLink-I 3000

Brands by name

Popular brands

Nera WiLink-I 3000, System Manual

Search results

Summary of Contents for WiLink-I 3000

Reviews:

Related manuals for WiLink-I 3000

Brands by name

Popular brands