manualshive.com logo in svg

Nera WiLink-I 3000, System Manual

The Nera WiLink-I 3000, a cutting-edge wireless communication device, is accompanied by a comprehensive System Manual for user convenience. This invaluable manual can be easily downloaded for free from our website, enabling users to access detailed instructions and maximize their experience with this exceptional product.

Share
Download
background image

Services Menu

WiLink-I Modular Base Station System Manual

143

Hybrid VLAN Mode of operation enables classification of both tagged and 
untagged packets or untagged packets only, according to the following rules:

The guidelines that should be followed when defining VLAN IDs and related 
parameters are:

¢

A specific VLAN ID behind a certain SU can be associated only with a single 
Service of a certain Service Type. It is not possible to define two Services of the 
same Service Type for the same SU and VLAN ID. However, the same SU and 
VLAN ID can be associated with two Services of different Service Types, 
excluding the combination of L2 Service and Voice Service.

¢

For each Service Type, a maximum of one Service that enables forwarding of 
untagged packets can be assigned to an SU. Forwarding of untagged packets 
is supported when either Hybrid VLAN Mode is On, or Hybrid VLAN Mode is 
Off and the VLAN List is empty. It is not possible to define for the same SU two 
Services of the same Service Type that enable forwarding of untagged packets. 
However, the same SU and untagged packets can be associated with two 
Services of different Service Types, excluding the combination of L2 Service 
and Voice Service.

¢

The maximum total number of VLAN IDs behind the same SU is 16 (15 when 
there is a Service with Hybrid VLAN Mode On is assigned to the SU).

¢

The combination of VLAN Transparency Service On, Hybrid VLAN Mode Off 
and an empty VLAN List means that all packets are forwarded. This 
combination should be used only if the Service Provider can ensure that there 
will not be conflicts between VLAN IDs used by devices behind the SU and 
existing VPL IDs.

Table 4-6: Hybrid VLAN Mode

Hybrid VLAN 
Mode

VLAN List

Forwarded Packets

Off

Exists

Only packets tagged with a VLAN ID that exists in the VLAN List. 

VLAN List can include up to 16 entries.

Empty

All (both untagged and tagged with any VLAN ID)

On

Exists

Untagged packets, and packets tagged with a VLAN ID that exists in 

the VLAN List. VLAN List can include up to 15 entries.

Empty

Only untagged frames.

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments

Related manuals for WiLink-I 3000

Delta BIESEMEYER 78-955 Instruction Manual preview
BIESEMEYER 78-955
Brand: Delta Pages: 12
BAC PT2 Operation & Maintenance Manual preview
PT2
Brand: BAC Pages: 36
Baader Planetarium Stronghold Instruction Manual preview
Stronghold
Brand: Baader Planetarium Pages: 6
CAME MR8003 User Manual preview
MR8003
Brand: CAME Pages: 4
Camoplast T4S User Manual preview
T4S
Brand: Camoplast Pages: 60
paramondo EASY Installation Instructions Manual preview
EASY
Brand: paramondo Pages: 44
Hanlong Unicorn 3001 User Manual preview
Unicorn 3001
Brand: Hanlong Pages: 26
Waterpik WP-320 Series Quick Start Manual preview
WP-320 Series
Brand: Waterpik Pages: 2
Xblitz G250 User Manual preview
G250
Brand: Xblitz Pages: 16
J.Burrows JB21UNISTY Instruction Manual preview
JB21UNISTY
Brand: J.Burrows Pages: 4
Logik LUPAUSL13E Instruction Manual preview
LUPAUSL13E
Brand: Logik Pages: 52
Vega SMART-SS0102 User Manual preview
SMART-SS0102
Brand: Vega Pages: 36
Yakima K674 Instructions Manual preview
K674
Brand: Yakima Pages: 13
Menabo 000081000000, Fitting Instructions Manual preview
000081000000,
Brand: Menabo Pages: 11
RADWAG PUE H315 User Manual preview
PUE H315
Brand: RADWAG Pages: 28
Veko MDO-O Installation And User Manual preview
MDO-O
Brand: Veko Pages: 2
N-Com SPCOM00000091 Quick Start Manual preview
SPCOM00000091
Brand: N-Com Pages: 6
Optex Pro Swing OA-Edge T Original Instructions preview
Pro Swing OA-Edge T
Brand: Optex Pages: 2

Brands by name

Popular brands

Load more brands