manualshive.com logo in svg

Nera WiLink-I 3000, System Manual

The Nera WiLink-I 3000, a cutting-edge wireless communication device, is accompanied by a comprehensive System Manual for user convenience. This invaluable manual can be easily downloaded for free from our website, enabling users to access detailed instructions and maximize their experience with this exceptional product.

Share
Download
background image

142

Operation

Chapter 4 - Operation and Administration

¯

Any number of L2 and/or VoIP Service Profiles may share the same VPL ID, 
provided they all use the same Forwarding Rule.

¯

Any number of PPPoE Service Profiles may share the same VPL ID, 
provided they all use the same Forwarding Rule.

¯

Any number of L2, VoIP and PPPoE Service Profiles may share the same 
VPL ID, provided that all L2/Voice Service Profiles use the same 
Forwarding Rule A, and all PPPoE Service Profiles use the same Forwarding 
Rule B, where A and B are different.

The VLAN Transparency Mode defines the method of transferring packets to the 
operator's upstream network. When set to On, data packets sent from the Base 
Station to the backbone will be transferred transparently. The VPL ID parameter 
is not applicable to Service Profiles with VLAN Transparency Mode On.

¢

For tagged packets, the VPL ID will be their VLAN tag. 

¢

For untagged packets, the VPL ID will be None. 

For packets received from the network, the forwarding decision will be according 
to the packet's VPL ID. If the VPL ID is unknown (either None or not included in 
the list of VPL IDs defined for any of the existing, non-transparent Service 
Profiles), the system will assume this is a transparent VLAN packet (if at least one 
transparent Service is defined) and transfer it with the original VLAN tag (or 
untagged if there is no VLAN tag).

For transparent services, VLAN Classification Mode can be set to On to enable 
downlink classification based on both the MAC Address and VLAN ID, to support 
applications with multiple VLAN IDs per a single MAC address. All Services 
assigned to the same SU must be configured with the same VLAN Classification 
Mode (Either On or Off). If VLAN Classification Mode is On, only a single VLAN ID 
can be defined for the Service. This means that the allowed combinations are:

¢

Hybrid VLAN Mode is Off and the VLAN List includes a single VLAN ID.

¢

Hybrid VLAN Mode is On and the VLAN List is empty.

For transparent services it is also possible to configure an Access VLAN to be used 
with untagged packets received on the Ethernet port of the SU. This parameter is 
applicable only for a transparent service with Hybrid Mode set to On, or a 
transparent service with Hybrid Mode set to Off and an empty VLAN list.

A maximum of one Access VLAN can be defined per SU.

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments

Related manuals for WiLink-I 3000

Makita RBC260 Service Information preview
RBC260
Brand: Makita Pages: 12
YOKOGAWA FD30 Instruction Manual preview
FD30
Brand: YOKOGAWA Pages: 12
Garmin GFS 10 - Fuel Sensor Configuration Manual preview
GFS 10 - Fuel Sensor
Brand: Garmin Pages: 2
PASCO PS-3201 Reference Manual preview
PS-3201
Brand: PASCO Pages: 8
Kelvion TEC1 Installation & Maintenance preview
TEC1
Brand: Kelvion Pages: 30
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
Aastra ETIQUETTE MEMOIRE M I740N Schematic Diagram preview
ETIQUETTE MEMOIRE M I740N
Brand: Aastra Pages: 1
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
J.Burrows JB21UNISTY Instruction Manual preview
JB21UNISTY
Brand: J.Burrows Pages: 4
ACEBIKES STEADYSTAND Cross Basic Manual preview
STEADYSTAND Cross Basic
Brand: ACEBIKES Pages: 6
RADARchron Arrowspeed Quick Start Manual preview
Arrowspeed
Brand: RADARchron Pages: 2
Ednet 31901 User Manual preview
31901
Brand: Ednet Pages: 4
Walimex Pro WAL-6702 Manual preview
WAL-6702
Brand: Walimex Pro Pages: 7
Napoleon GPFL Installation preview
GPFL
Brand: Napoleon Pages: 4
Zacuto GH5 Rod Support Base Instructions preview
GH5 Rod Support Base
Brand: Zacuto Pages: 2
Ops-Core Mesh Helmet Cover Installation preview
Mesh Helmet Cover
Brand: Ops-Core Pages: 2
Manfrotto MKCOMPACTLT-BK Instructions Manual preview
MKCOMPACTLT-BK
Brand: Manfrotto Pages: 7
Endon EL- 40068 PIR Instruction Manual preview
EL- 40068 PIR
Brand: Endon Pages: 2

Brands by name

Popular brands

Load more brands