manualshive.com logo in svg

Nera WiLink-I 3000, System Manual, Page: 238 / 250

Share
Download
Nera WiLink-I 3000 System Manual Download Page 238

218

WiLink-I Modular Base Station System Manual

TCP/IP

Transmission Control Protocol/Internet Protocol. A set of protocols 
developed by the U.S. Department of Defense to allow 
communication between dissimilar networks and systems over long 
distances. TCP/IP is the de facto standard for data transmission 
over networks, including the Internet.

TDM

Time Division Multiplexing. Technique in which information from 
multiple channels can be allocated bandwidth on a single link based 
on pre-assigned time slots. Bandwidth is allocated to each channel 
regardless of whether the station has data to transmit.

TFTP

Trivial File Transfer Protocol. Simplified version of FTP that allows 
files to be transferred from one computer to another over a network, 
usually without the use of client authentication.

TTL

Time To Live

Tx

Transmit

 BST

Micro Base Station

U

A unit for measuring the height in rack cabinets. 1U = 1.75 inches.

UDP

User Datagram Protocol.  Connectionless transport layer protocol in 
the TCP/IP protocol stack. UDP is a simple protocol that exchanges 
datagrams without acknowledgments or guaranteed delivery, 
requiring that error processing and retransmission be handled by 
other protocols. UDP is defined in RFC 768.   

UL

Up Link

VLAN

Virtual Local Area Network. A group of devices on one or more LANs 
that are configured with the same VLAN ID so that they can 
communicate as if they were attached to the same wire, when in fact 
they are located on a number of different LAN segments. Used also 
to create separation between different user groups.

VLSI

Very Large Scale Integration. The process of placing thousands (or 
hundreds of thousands) of electronic components on a single chip.

VoIP

Voice over Internet Protocol. Provides an advanced digital 
communications network that bypasses the traditional public 
switched telephone system and uses the Internet to transmit voice 
communication. VoIP enables people to use the Internet as the 
transmission medium for telephone calls by sending voice data in 
packets using IP rather than by traditional circuit switched 
transmissions of the PSTN.

Summary of Contents for WiLink-I 3000



























































































































































































































































Reviews:

No comments