Data Assignment
Chapter 4
INITIAL SETUP
156
WEP-Key/Psk-Phrase
Type characters for WEP-Key
or Psk-Phrase. This parameter
becomes available to input
when one of the following is
selected in Security:
– WPA-PSK(TKIP)
– WPA2-PSK(TKIP)
– WPA2-PSK(AES/CCMP)
– Static-WEP
When Static-WEP is
selected (WEP-Key):
When using alphanumeric
character input, type five
characters (64-bit encryption)
or 13 characters (128-bit
encryption)
When other than
Static-WEP is selected
(Psk-Phrase):
When using alphanumeric
character input, type 8 to 63
characters.
Do not use a space in the first
letter and the end letter.
RADIUS Server is required when
one of 802.1X, WPA or WPA2 is
selected for Security
This parameter becomes
available to input when
802.1X, WPA(TKIP),
WPA2(TKIP),
or WPA2(AES/
CCMP) is selected in Security.
Table 7. Configure WLAN Network
PARAMETERS
REMARKS
Summary of Contents for WL1700-MS
