Data Assignment
Chapter 4
INITIAL SETUP
133
13
Create Radio Profiles.
In UNIVERGE WL System, a set of Radio Frequency, which can be specified
per RF module, is managed as a Radio Profile.
To create the Radio Profile, select
[WLANs]
-
[Radio Profiles]
on the main
menu. Click the
New
button to display New Radio Profile screen. Specify the
following and click the
Add
button.
ITEMS
REMARKS
Profile Name
Specify a Profile Name.
[Basic Setting 1: AP1-RF1]
[Basic Setting 2: AP1-RF2]
[Basic Setting 3: AP2-RF1]
Auto-Tune Channel Config
Channel Auto Tuning
Select Enabled if Channel Auto Tuning is enabled.
[Basic Setting 1/2/3: Clear the check boxes]
Auto-Tune Power Config
Transmission Power Auto Tuning
Select Enabled if Power Auto Tuning is enabled.
[Basic Setting 1/2/3: Clear the check boxes]
QoS Mode
Specify a QoS mode (WMM/SVP/Voice-Ext)
Service Profile List
Select a Service Profile to be mapped.
[Basic Setting 1: Dot1x-B, WPA-B]
[Basic Setting 2: WPA-A]
[Basic Setting 3: Dot1x-B]
Basic Settings
Summary of Contents for WL1700-MS
