Hard Disk Drive Specifications and Jumper Settings C-3
540-MB HARD DISK DRIVE JUMPER SETTINGS
The 540-MB hard drive uses one user selectable jumper block (JP1) to configure the
master/slave and cable select options of the hard drive. Jumper block JP1 has three jumper
settings: CS (cable select), DS (drive select), and SP (slave present). The factory default is
the middle jumper (DS) jumpered to set the drive as the master. See Figure C-1 for jumper
settings.
Connector End
of Drive
CS DS SP
CS DS SP
CS DS SP
ONLY DISK OR DISK ONE OF TWO (FACTORY SETTING)
Sets the drive as the only hard disk (master only) in the system.
Sets the drive as the first (master) of two drives when you have
two hard disks (master and slave) installed in the system.
DISK TWO OF TWO
Sets the drive as the second (slave) of two drives when you have
two hard disks (master and slave) installed in the system.
CS DS SP
DISK TWO OF TWO (jumper parked position)
Same as Disk Two of Two description.
Figure C-1 Quantum 540-MB Jumper Settings
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...