Minitower Repair 6-15
PCI/ISA Backboard Removal
Remove the PCI/ISA backboard per the following steps.
1.
Remove the system unit cover and any installed expansion slot boards as
previously described in this section.
2.
Remove the two screws that secure the backboard to the support bracket (see
Figure 6-20).
3.
Pull the backboard out from its connector on the system board and remove it from
the system.
Figure
6-20
PCI/ISA
Backboard
System Board Removal
Remove the system board per the following steps.
1.
Remove the following components as previously described in this section:
system unit cover
expansion slot boards
PCI/ISA backboard
SIMMs
rear 3 1/2-inch internal drive
Support Bracket
Screws
System Board
Connector
PCI/ISA
Backboard
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...