Option Installation 3-33
3.
Use the previously removed bracket screw to secure the bracket in place (see
Figure 3-33).
3 1/2-Inch
Drive Bracket
Tabs
Tab
Screw
Figure 3-33 Securing the 3 1/2-Inch Drive Bracket
4.
Replace the desktop front panel (see Replacing the Desktop Front Panel).
5.
Replace the system unit cover.
NOTE:
If a 1.2-MB diskette drive was installed,
remove the protective cardboard insert from the
drive.
6.
Run the Setup program to set the new configuration.
Minitower Storage Device Installation
The following subsections describe how to install 3 1/2-inch and 5 1/4-inch drives. The
installation procedures include:
installing a 3 1/2-inch drive in the minitower internal front slot
installing a 3 1/2-inch drive in the minitower rear slot
removing the minitower front panel
installing a minitower 5 1/4-inch device
replacing the minitower front panel.
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...
