![background image](http://html.mh-extra.com/html/nec/powermate/powermate_service-manual_248634152.webp)
Minitower Repair 6-11
4.
Remove the four screws that secure the rails to the sides of the device(see
Figure 6-14.
Device
Device Rails
Figure 6-14 Removing the Device Rails
Rear 3 1/2-Inch Drive Removal
Remove an optional 3 1/2-inch hard disk drive from the system as follows.
1.
Remove the system unit cover as previously described (see “System Unit Cover
Removal” in this section).
2.
Unplug the power and signal cables from the3 1/2-inch internal drive and the
standard hard disk drive installed in the rear internal drive bracket.
3.
Remove the two screws that secure the rear internal drive bracket (see
Figure 6-15).
Rear Slot
Drive Bracket
Screws
Figure 6-15 Removing the Drive Bracket Screws
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...