Desktop Repair 5-3
2.
Remove the two cover screws shown in Figure 5-1.
Screws
Figure 5-1 System Unit Cover Screws
3.
Slide the system unit cover toward the front about one inch.
4.
Lift the system unit cover up and off (see Figure 5-2).
Figure 5-2 Removing the System Unit Cover
Expansion Board Removal
Remove any installed expansion board(s) using Figure 5-3 through Figure 5-4 and the
following steps.
1.
Remove the system unit cover as previously described.
2.
Disconnect any cables leading from the expansion board(s).
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...
