3-30 Option Installation
Tabs
(behind panel)
Front Panel
Blank Panel
Figure 3-29 Removing the Front Panel
3.
Identify the slot for the device being installed.
4.
Remove the blank panel from the selected slot by pressing the panel tabs from
inside the front panel and pushing the blank panel out (see Figure 3-30).
Figure 3-30 Locating the Blank Panel Tabs
5.
Remove the perforated metal plate from the selected slot on the chassis by pulling
the metal plate back and forth until it releases.
6.
Install the device (see Installing the Desktop 5 1/4-Inch Device).
Top Blank
Panel Tabs
Bottom Blank
Panel Tabs
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...