Option Installation 3-27
Cabling a Diskette Drive
1.
Connect the diskette drive signal cable connector to the signal connector on the
diskette drive (see Figure 3-26).
2.
Locate an available power connector.
3.
Connect the power cable to the power connector on the device.
Figure 3-26 Connecting 1.2-MB Diskette Drive Cables
Desktop Storage Device Installation
The following subsections describe how to install 3 1/2-inch and 5 1/4-inch drives. The
installation procedures include:
removing the desktop 3 1/2-inch drive bracket
installing a desktop 3 1/2-inch drive
removing the desktop front panel
installing a desktop 5 1/4-inch device
replacing the desktop front panel
replacing the desktop 3 1/2- inch drive bracket.
Red Edge
Diskette Drive
Signal Cable
Connector
Power
Cable
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...