![background image](http://html.mh-extra.com/html/nec/powermate/powermate_service-manual_248634151.webp)
6-10 Minitower Repair
3.
Remove the device as follows:
If removing the device from the top 5 1/4-inch slot, remove the four screws,
two to a side, that secure the device in the cage (see Figure 6-12 and
Figure 6-13).
If removing a device from the middle or bottom 5 1/4-inch slot, remove the
two screws that secure the device in the cage (see Figure 6-12).
Slide the device out from the front of the system unit.
Two of Four
Top Device
Screws
Middle Device
Screws
Figure 6-12 Front and Left Side Device Screws
Two of Four
Top Device
Screws
Power and Signal Cable
Connections (not shown)
Figure 6-13 Right Side Device Screws
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...