Section 6
Minitower Repair
DISASSEMBLY AND REASSEMBLY
This section contains step-by-step disassembly procedures for the minitower systems. The
hard disk drive, and 3 1/2-inch diskette drive are installed and included in these disassembly
procedures. Reassembly is the reverse of disassembly. Each procedure is supported by a
simplified disassembly illustration to facilitate removal. The detailed exploded-view diagram
and parts lists for the minitower systems are shown later in this section.
A Phillips-head screwdriver is the only required tool. For complete disassembly of the
system unit, follow the disassembly order listed in Table 6-1. To reassemble, follow the
table in reverse order.
Individual removal procedures do not require the total disassembly of the computer. Each
of the following subsections lists the parts that must be removed before beginning the
removal procedure. To reassemble, follow the procedure in reverse order.
Table 6-1 PowerMate V Minitower Disassembly Sequence
Sequence
Part
See Page
1
System unit cover
6-2
2
Expansion board(s)
6-4
3
SIMM sticks
6-4
4
Front 3 1/2-inch hard disk drive
6-6
5
3 1/2-inch diskette drive
6-7
6
Front panel assembly
6-7
7
Blank panel and metal cover plate
6-8
8
5 1/4-inch device
6-9
9
Rear 3 1/2-inch hard disk drive
6-11
10
Card guide/fan bracket
6-12
11
Speaker assembly
6-13
12
Power supply
6-14
13
PCI/ISA backboard
6-15
14
System board
6-15
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...
