![background image](http://html.mh-extra.com/html/nec/powermate/powermate_service-manual_248634103.webp)
Option Installation 3-31
Installing the Desktop 5 1/4-Inch Device
Install an accessible device into the desktop device cage as follows.
1.
Remove the 3 1/2-inch drive bracket from the system unit (see Removing the
Desktop 3 1/2-Inch Drive Bracket).
2.
Remove the desktop front panel (see Removing the Desktop Front Panel).
3.
Follow the preinstallation instructions that come with the device, such as setting
jumpers and switches.
NOTE:
If the device comes with rails, do not
attach them. Remove any rails already attached.
4.
From the front of the system, insert the device, connector end first, into the device
slot.
NOTE:
To easily access device connectors for
cabling, do not insert a 5 1/4-inch device all the
way into the slot.
5.
Connect the device cables.
6.
Align the holes in the device with the holes in the cage.
7.
Secure the device to the cage with the four screws, two to a side, that come with
the device (see Figure 3-31).
Figure 3-31 Securing the Device
Two of Four
Screws
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...