5-10 Desktop Repair
5 1/4-Inch Device Removal
Remove an 5 1/4-inch device from the 5 1/4-inch device cage per Figure 5-12, and the
following steps.
1.
Remove the system unit cover, front panel, and 3 1/2-inch drive bracket as
previously described.
2.
Unplug all signal and power cables from the device(s) in the 5 1/4-inch device
cage (see Figure 5-12).
3.
Remove the four device screws; two from each side of the 5 1/4-inch device cage
(see Figure 5-12).
4.
Remove the device out of the 5 1/4-inch device cage from the front of the
system unit.
NOTE:
When reinstalling the 5 1/4-inch device,
note that all power cables are keyed to fit only in
the correct position. The red edge of the diskette
drive signal cable is positioned as shown.
Figure 5-12 5 1/4-Inch Device Screws
Two of Four
Screws
Power and Signal
Cables (not shown)
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...