B-4 System Board Jumpers
Figure B-3 Processor Settings with Two BF Jumpers (BF0 and BF1)
8.
Reinstall any removed expansion boards.
9.
Reinstall the system cover.
10.
Reconnect any disconnected peripherals and turn on the system.
CHANGING THE PASSWORD
If a password is forgotten, use the following procedures to clear the current password and
to set a new one.
1.
Turn off and unplug the system and any connected external options.
WARNING:
System power must be off before
removing the cover and changing a jumper
setting.
Processor/Bus Speed
75-MHz Processor/
50-MHz Bus Speed
90-MHz Processor/
60-MHz Bus Speed
100-MHz Processor/
66-MHz Bus Speed
120-MHz Processor/
60-MHz Bus Speed
133-MHz Processor/
66-MHz Bus Speed
150-MHz Processor/
60-MHz Bus Speed
166-MHz Processor/
66-MHz Bus Speed
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
VRE (3.38 V)
VR (3.52V)
90 100 75
MHz MHz MHz
BF1
BF0
ATCLK
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...