3-32 Option Installation
8.
Replace the drive bracket (see Replacing the Desktop 3 1/2-Inch Drive Bracket).
Replacing the Desktop Front Panel
Replace the desktop front panel only after it has been removed for a 5 1/4-inch device
installation. If installing a 5 1/4-inch device, see Installing the Desktop 5 1/2-Inch Device.
1.
Align the four front panel tabs with the holes in the front of the system unit.
2.
Evenly press the front panel into position until the tabs lock the panel in place (see
Figure 3-32).
Tabs
(behind panel)
Front Panel
Blank Panel
Figure 3-32 Aligning the Desktop Front Panel
3.
Continue to Step 5 in Replacing the Desktop 3 1/2-Inch Drive Bracket.
Replacing the Desktop 3 1/2-Inch Drive Bracket
When replacing the 3 1/2-inch drive bracket, take care to prevent pulling and loosening the
cable connections.
1.
Place the 3 1/2-inch drive bracket in the 3 1/2-inch device slot.
2.
Slide the 3 1/2-inch drive bracket toward the front of the chassis so that the tabs
secure the bracket.
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...