Setup and Operation 2-9
Plug the microphone into the microphone in jack at the rear of the system (see
Figure 2-11).
Figure 2-11 Connecting the Microphone
6.
Press the power button (see Figure 2-12) to power-on the system. The power
lamp lights green, indicating that the system is in Full-Power mode.
The system automatically goes into its Power-On-Self-Test (POST), and checks
system components. One beep indicates that the system has successfully
completed its power-on test.
If a problem occurs, a series of beeps may sound. If this happens repeatedly after
powering on, power off the system and Troubleshoot.
Microphone In
Jack
Line In Jack
Line Out Jack
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...
