![background image](http://html.mh-extra.com/html/nec/powermate/powermate_service-manual_248634176.webp)
Appendix B
System Board Jumpers
This appendix provides jumper setting information for configuring the system for a
particular system requirement. Situations that require changing the jumper settings include
the following:
upgrading the processor
clearing a password
clearing CMOS.
CAUTION:
Jumpers are set correctly at the
factory for the shipped configuration. If the
system requires a jumper change, change only the
jumper setting for that condition. Otherwise,
keep the jumpers at their factory settings.
JUMPER LOCATIONS
Figure B-1 shows the location of the system board jumpers.
Figure B-1 System Board Jumper Locations
BIOS Recovery
Password Clear
ATCLK
Processor/Bus Speed
Processor
Voltage
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...