3-26 Option Installation
Device Cabling
All storage devices require a power and signal cable connection. Devices shipped with the
system are already connected. Cable optional devices as follows.
Cabling an IDE Device
1.
Connect the IDE signal cable connector to the connector on the IDE device.
Take care to prevent bending drive connector pins. Align the IDE cable connector
as shown in Figure 3-25.
2.
Locate an available power connector coming from the power supply.
3.
Connect the appropriate power cable to the power connector on the IDE device.
Figure 3-25 Connecting IDE Device Cables
4.
If installing an IDE CD-ROM reader, also connect the audio cable (see the
instructions that come with the reader).
Power Cable
IDE Cable
Red
Edge
Summary of Contents for POWERMATE
Page 14: ...xvi Preface ...