NEC Electra Elite 48/192, Features And Specifications Manual

Page: 138 / 652

Electra Elite Issue 6
Features and Specifications Manual C - 19
Use Memory Block 4-01 [CO/PBX Ring Assignment (Day Mode)] or
4-02 [CO/PBX Ring Assignment (Night Mode)] to make the CO/PBX
ringing assignments.
Use Memory Block 3-53 (Caller Name Indication Selection) to allow
the name (NAM) (default: NUM) to be displayed When system speed
dial buffers are assigned number and name and when the Caller ID
number information matches an assigned speed dial number.
When the name is not included in the Caller ID information, Memory
Block 3-53 (Caller Name Indication Selection) compares the Caller ID
information with the dial data in the speed dial area. When the
numbers match, the name in the speed dial area is used as the
name.
When a CAR key is assigned on the Multiline Terminal and a DIT/
ANA or VRS/Automated Attendant transferred call is received at the
CAR, the following assignments are required:
• Use Memory Block 4-41 (SIE/CAR Ringing Line Preference
Selection) to specify whether to allow (default: YS) or deny
(NO) Ringing Line Preference (go off-hook or press speaker
key) on all telephones that are assigned to CAR keys.
• Assign the Multiline Terminal with the CAR key as part of the
Caller ID group.
Scrolling Caller ID with Return Call
Use Memory Block 7-3-04 [MIF (Caller ID) Assignment) to specify
Scrolling and/or Out Dial function to the MIFM-U10 ETU with
KMM(1.0).
Use Memory Block 4-44 (Caller ID Preset Dial Outgoing CO
Selection) to assign the Trunk Group, Route Advance Group, or
Closed Numbering Group that is seized for Caller ID Outgoing Calls.
Use Memory Block 4-12 (Line Key Selection for Telephone Mode) to
assign the Scroll Key to a line key for each Multiline Terminal using
the Scroll Feature.
Restrictions:
To receive Caller ID Indication, the COID(4)/(8)-U10 ETU or
COIB(4)-U10 ETU must be installed in slots S1~S4 of the Basic or
the first expansion KSU of the Electra Elite 192 system. In the
Electra Elite 48 system, slots S3 and S4 of the B48-U10 KSU must
be used.
SIE incoming calls do not support Caller ID Indication even when the
Multiline Terminal is ringing.