NEC Electra Elite 48/192, Features And Specifications Manual

Page: 193 / 652

C - 74 Code Restriction
Issue 6 Electra Elite
Use Memory Block 1-1-24 (PBX/CTX Access Code Assignment I)/
1-1-25 (PBX/CTX Access Code Assignment II) to specify the PBX/
Centrex Trunk Access Codes When the system is installed behind a
PBX or Centrex. This code is ignored when dialed.
Use Memory Block 1-1-62 (System Speed Dial Override by Class
Selection) to assign Classes 01~14, per Class, to YS (override
System Speed Dial).
Use Memory Block 1-1-69 (Tie Line Code Restriction Assignment) to
assign Code Restriction for Tie line use system-wide (default: YS).
Use Memory Block 1-1-70 (Code Restriction Class Assignment when
Lockout is Set) to assign a preprogrammed Code Restriction class
when Attendant Station Outgoing Lockout or Station Outgoing
Lockout is set (default: Class 15, Outgoing Restricted).
Code Restriction is allowed or denied per Trunk group.
General:
At default, the 14 programmable station classes are assigned as
follows:
The use of other common carriers (equal access) can be allowed or
denied by the Code Restriction feature.
Code Restriction applies after CO Feature Code is dialed.
When using Code Restriction with LCR, Code Restriction is applied
to the digits dialed by the system.
Class 01: Deny 0 and 1+ calls
Class 02: Deny 0 and 1+ calls, Allow 1-800, 1-888, 1-877 calls
Class 03: Deny 0, 1+, and 976 calls, Allow 1-800, 1-888, 1-877
calls
Class 04: Deny only 1+ calls, Allow 1-800, 1-888, and 1-877
calls
Class 05~14: Allow only 911 calls
All classes deny OCC calls.
Classes 01~04 allow local calls.