4-34
BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Setup
4.11 Data Functions
Select the
Data
option from the menu to specify a variety of op-
tions related to the display of measurement data.
If you have purchased the Rotary Fixture, the words
Fixture Po-
sition
option will appear as shown. You can set Deviation, Nom-
inal, Limits, and Tolerance values from this menu.
The
Deviation
of the measured product size from the desired
(Nominal) value is an important value. Use this page to alter the
title of this value to something meaningful and relevant to your
application and to display or not display deviation. Deviation is
calculated as:
Deviation = Nominal - Size
From the
Nominal
Setup page you can change the label for this
value and determine where and whether it will be displayed on
the main measurement display page. This value can also be
transmitted via the serial #1 port or serial USB if desired. Serial
output settings are defined under the System functions.