NDC BenchMike Pro, Instruction Handbook Manual, Page: 51 / 146

BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Workholding Fixtures 3-9
3.3.3.2 Drawing of the Adjustable Centers mounted on the DRO Slide
Features of Adjustable V-Blocks include:

Pair of adjustable V-blocks that mate with the dovetail rail. V height is adjusted by locking knob. Millimeter
position scale.

V-block part size range: 2.286-50.8 mm (0.090-2.0 in.)

V’s are case-hardened with an included angle of 90°

When mounted as shown, the maximum part length that will fit in the V-blocks without hanging over is as
follows:
Slide A
18 in. Slide 361.95 mm (14.25
in.)
25 in. Slide 539.75 mm (21.25
in.)
32 in. Slide 717.55 mm (28.25
in.)

Adjustable V-Blocks, mounted in the DRO Slide, will support a maximum weight equivalent to a 2-inch
steel bar of length A (table above).