BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Advanced Capabilities
5-5
ceil
ceil(num)
Ceiling; returns smallest integer not less
than num.
cos
cos(num)
Cosine of num; num is given in radians.
degrees
degrees(angle)
Converts an angle in radians to degrees.
cosh
cosh(num)
Hyperbolic cosine of num.
exp
exp(num)
Natural logarithm power; e
num
floor
floor(num)
Floor; returns largest integer not greater
than num.
log
log(num)
Natural logarithm (base e) of num.
log10
log10(num)
Base-10 logarithm of num.
max
max(num1,num2)
Maximum of num1 and num2.
min
min(num1,num2)
Minimum of num1 and num2.
pi
pi( )
Mathematical constant pi.
pow
pow(num,pow)
Raises num to the power “pow”
radians
radians(angle)
Converts degrees to radians.
sin
sin(num)
Sine of given angle; num is in radians
sinh
sinh(num)
Hyperbolic sine of given angle, num.
sqrt
sqrt(num)
Square root of num
tan
tan(num)
Tangent of given angle; num is in radians
tanh
tanh(num)
Hyperbolic tangent of given angle, num.
5.2
Advanced Screen Capabilities
The BenchMike Pro also has advanced screen capabilities. These capabilities allow you to display up to 32
data items in the data display area of the screen. When more than four data items are selected for display,
a scroll bar appears on the right of the screen so that you can move through the selected items.
When tolerance checking has been enabled for a displayed data item, the data item will be automatically scrolled
into view if the condition(s) defined by Display Scrolling are detected. These conditions are: Warning Tolerance
only, Reject Tolerance only, Warning or Reject Tolerance, and Never.
5.2.1
Accessing Advanced Capabilities
Follow these steps to access these advanced capabilities.
1)
Touch the
Status
icon (shows OK, Err, or !) from the main screen.
2)
Touch the
About
button.