BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Setup
4-17
Fixture Sample and Fixture Batch Reports are generated when multiple measurements are made of one part, as
performed by an Intelligent Fixture. A Fixture Sample Report will print at the end of each part measurement cycle.
A Fixture Batch Report will print when the Batch Count equals the Part Count value or when the Print key is
touched.
The following are samples of the four types of reports.
The Sample and Batch Reports which follow are used when measuring samples with a V-Block or other
simple measurement fixture. They are printed after all measurements have been taken by touching Print.
The Fixture Sample and Fixture Batch Reports shown can be created when either a manual or a NDC
Technologies Intelligent Fixture is used.