BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Setup
4-27
The
Delete
function deletes the current feature. You will be
asked to confirm that you wish to delete the feature.
Shortcut:
Touch the Feature number (shown here as F01) to display this
screen.
You can create a new feature with the
Insert New
function. By
default, the new feature will be created in the current library,
following the current feature. You will be asked to confirm that
you wish to create a new feature.
To move between features, touch the
Select
option. You can
choose to move forward or backward through the features you
have defined.
With the
Sequence
function, you can determine the order in
which Features are performed. You can choose Sequential or
Simultaneous Sequences, as shown.
In Sequential mode, measurements are only performed on the
current Feature.
In Simultaneous mode, all Features within the current library
will take measurements and display results concurrently. For
this reason, all Features for Simultaneous mode will use the
measurement type defined in Feature 1. Fixture measurement
settings from Feature 1 will also be used in Simultaneous
mode.