5-6
BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Advanced Capabilities
3)
Touch the
Configure
button.
4)
Enter the password. The default password is
000000
.
5)
Select the
Screen
tab. Make sure the
Advanced
Screen Operation
box is checked to enable these capabili-
ties. Click OK.
6)
From the main data display, touch any data item in the center of the screen. A new menu will appear as
shown.
The
Magnify
function magnifies a single line of data to be vis-
ible from a distance.
The
Delete
function deletes the line of data that was touched,
and the line below it is moved up one line.
The
Edit
function brings up the Display Data Edit page and is
used to edit an existing line of data. The three properties as-
sociated with this data item can be changed as follows.
Type
can be set to Data or Variable.
Source
can be set to any Feature number, from 1 to 32.
Item
can be set to: Average, Count, Deviation, Difference/TIR,
Lower Reject Limit, Lower Reject Tolerance, Lower Warning
Limit, Lower Warning Tolerance, Maximum, Minimum, Nomi-
nal, Position, Position Offset, Size, Size Offset, Standard Deviation, Upper Reject Limit, Upper Reject Tolerance,
Upper Warning Limit, Upper Warning Tolerance.
The
Insert
function brings up the Display Data Edit page and is used to insert a line of data before or after the
selected line.
The
Move
function rearranges the order of the lines on the main data page. You can move the selected data line
Up One line, Down One line, to the Top, or to the Bottom.
If any of the items selected for display are from a different Feature, they will be identified by the Feature number
to the right of the data label.
If you wish to change or disable these screen functions, repeat these steps as required.