7.8.1
Single Mode and Group Mode
In TRAKTOR, each FX Unit can work in two different modes:
▪
Group mode: Each FX Unit boards three different FX chained in series. Each FX can be
controlled by one knob and one button.
▪
Single mode: Each FX Unit boards a single FX, which can be fine-tuned via the three
knobs and three buttons of the FX Unit.
As a consequence, the control elements on an FX Unit will have different functions, depending
on the current mode of this FX Unit.
You can set both modes in TRAKTOR's
Preferences > Effects > FX Panel Mode
.
7.8.2
FX Unit Reference
The following table sums up the functionality of each control element in the FX Unit.
Control element
Single mode
Group mode
FX On button
Normal: activates/deactivates FX Unit
globally (lit when activated).
SHIFT
: selects next FX from FX list (as
set in
Preferences > Effects > FX Pre-
Selection
).
Normal: not used.
SHIFT
: loads a set of three predefined FX
(as set in
Preferences > TRAKTOR KON-
TROL S2 > S2 Control Options > Direct
FX 1-3
).
FX DRY/WET knob
Adjusts the ratio between unprocessed (dry) signal and processed (wet) signal.
FX Knob 1-3
FX parameter 1-3 (FX-dependent).
Parameter for 1st, 2nd, and 3rd FX.
FX Button 1-3
FX Button 1: resets all FX parameters
to their default value.
FX Buttons 2 and 3: FX-dependent (lit
when activated).
SHIFT
+ button: loads a predefined FX
(as set in
Preferences > TRAK-
TOR KONTROL S2 > S2 Control Op-
tions > Direct FX 1-3
).
Activates/deactivates FX slot 1-3 (lit when
slot activated).
SHIFT
+ button: loads in this slot the next
FX from FX list (as set in
Preferences > Ef-
fects > FX Pre-Selection
).
Hardware Control Reference
Using the FX Units
Traktor Kontrol S2 - Manual - 128
Summary of Contents for TRAKTOR KONTROL S2
Page 1: ...Manual...
