Native Instruments TRAKTOR KONTROL S2 Manual Download Page 147

Page: 147 / 184

►

Click on the tabs at the left to open the corresponding page of the Control Panel.

9.2.2

Audio Settings Page

The

Audio Settings

page allows you to adjust the settings of the audio interface.

The Control Panel with Audio Settings page opened.

The

Audio Settings

page consists of two sections:

▪

Audio Processing

: settings for the analog-to-digital/digital-to-analog conversion done by

your audio interface.

▪

Device Monitor

: displays information about the audio interface's processing status and

your system's output latency.

Audio Processing Section

The

Audio Processing

section holds two menus and one display:

▪

Sample Rate

: Choose a sample rate that is compatible with your music application and

suited to your computing power. A higher sample rate improves the audio quality, but also
causes higher CPU load. By default, the sample rate is set to 44100 Hz (CD quality).

The S2 Audio Interface and Control Panel

Settings on Windows: The Control Panel

Traktor Kontrol S2 - Manual - 147

Summary of Contents for TRAKTOR KONTROL S2

























































































































































































Search results

Summary of Contents for TRAKTOR KONTROL S2

Reviews:

Related manuals for TRAKTOR KONTROL S2

Brands by name

Popular brands

Native Instruments TRAKTOR KONTROL S2, Manual

Search results

Summary of Contents for TRAKTOR KONTROL S2

Reviews:

Related manuals for TRAKTOR KONTROL S2

Brands by name

Popular brands