Bear in mind that all your actions affect a Floating Loop (and not the original Stored Loop, if
any). Hence, if you plan to use the modified Loop later, don’t forget to store it! For example,
you can do this by pressing an unlit
CUE/REMIX SLOTS
button (see section
↑
7.5, Using the
CUE/REMIX SLOTS Section
).
7.4.3
Loop SIZE Encoder
The Loop SIZE encoder.
The Loop
SIZE
encoder allows you to select/adjust the Loop size and to set a Floating Loop
with the selected size:
LOOP SIZE encoder
No Loop active
Loop active
Turn
Selects a Loop size (in beats) for the
next Floating Loop that you will set. The
selected Loop size is displayed in the
Loop Control section in TRAKTOR.
Halves/doubles the Loop’s size.
Push
Sets and activates a new Floating Loop
at the current playback position with the
selected Loop size.
Deactivates looping.
A Track Deck's Loop Size display in the TRAKTOR software.
You may have noticed that pushing either of the Loop MOVE and Loop SIZE encoders acti-
vates/deactivates looping. The only difference when activating looping via the Loop SIZE
encoder is that you additionally set a new Floating Loop at the current position.
Bear in mind that all your actions affect a Floating Loop (and not the original Stored Loop, if
any). Hence, if you plan to use the modified Loop later, don’t forget to store it! For example,
you can do this by pressing an unlit
CUE/REMIX SLOTS
button (see section
↑
7.5, Using the
CUE/REMIX SLOTS Section
).
Hardware Control Reference
Using the LOOP Section
Traktor Kontrol S2 - Manual - 110
Summary of Contents for TRAKTOR KONTROL S2
Page 1: ...Manual...
