7.10.2 MIDI Mode
The MIDI mode allows you to use your TRAKTOR KONTROL S2 as a regular MIDI controller.
In MIDI mode, the TRAKTOR KONTROL S2 will transmit only MIDI data via the virtual MIDI
port that the TRAKTOR KONTROL S2 driver will provide to the host computer’s operating sys-
tem.
Before proceeding with using the S2in MIDI mode, you must check the
Enable MIDI mode
via Shift + Shift
checkbox in the S2's Preferences in TRAKTOR.
The MIDI Mode section of the S2’s TRAKTOR preferences.
►
To switch your TRAKTOR KONTROL S2 between TRAKTOR mode and MIDI mode:
►
Hold
SHIFT
on one Deck and also press
SHIFT
on the other Deck of your S2.
→
When MIDI mode is enabled, both
SHIFT
buttons are lit.
To customize the S2’s MIDI properties, such as MIDI channel or CC numbers of its individual
controls, Native Instruments has included the Controller Editor. The Controller Editor should
have been installed during the TRAKTOR KONTROL S2 installation procedure. If you cannot
find the Controller Editor on your computer, you can install it from the TRAKTOR KON-
TROL S2 installation disc.
TRAKTOR mode and MIDI mode may be used simultaneously, for example you can control
TRAKTOR in TRAKTOR mode, then
SHIFT
+
SHIFT
to switch to MIDI mode to control oth-
er software or hardware over MIDI.
Hardware Control Reference
Native TRAKTOR Mode Vs. MIDI Mode
Traktor Kontrol S2 - Manual - 132
Summary of Contents for TRAKTOR KONTROL S2
Page 1: ...Manual...
