Native Instruments TRAKTOR KONTROL S2 Manual Download Page 88

Page: 88 / 184

Hardware Overview

This chapter will give you an overview of the controller sections and their software equivalents.

6.1

Top Panel - Main Areas

This section will give you an overview of the controller's top panel areas and their software
equivalents.

6.1.1

Decks

TRAKTOR KONTROL S2 provides you with two physical Decks. These Decks always control
Track Decks A and B of the TRAKTOR PRO 2 software. However, there is a dedicated mode for
controlling TRAKTOR's Remix Decks C and D with the

CUE/REMIX SLOTS

sections on both

Decks. The corresponding mode is called Remix Deck mode, whereby the four

CUE/REMIX

SLOTS

buttons on each Decks control the Remix Decks' Sample Slots. (See section

↑

7.5, Us-

ing the CUE/REMIX SLOTS Section

for more information on the

CUE/REMIX SLOTS

section's

modes). To sum it up:

▪

The left Deck on your S2 controls the upper Track Deck A in TRAKTOR (and the lower
Remix Deck C when in Remix Deck mode).

▪

The right Deck on your S2 controls the upper Track Deck B in TRAKTOR (and the lower
Remix Deck D when in Remix Deck mode).

Hardware Overview

Top Panel - Main Areas

Traktor Kontrol S2 - Manual - 88

Summary of Contents for TRAKTOR KONTROL S2

























































































































































































Search results

Summary of Contents for TRAKTOR KONTROL S2

Reviews:

Related manuals for TRAKTOR KONTROL S2

Brands by name

Popular brands

Native Instruments TRAKTOR KONTROL S2, Manual

Search results

Summary of Contents for TRAKTOR KONTROL S2

Reviews:

Related manuals for TRAKTOR KONTROL S2

Brands by name

Popular brands