Chapter 11 – Phone Book Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)
67
Avoid Phonebook Initialization +WAIP
Description:
This command controls access to the available phonebooks. If +WAIP is set to 1, phonebook initialization at
module startup is not performed and phonebook functions are not available. When +WAIP is set to 0, normal
phonebook functionality is available. A change to the WAIP <mode> value is saved to NV and becomes
active following a module reset.
Values:
<mode>
0
Enabled - Normal operating mode.
1
Disabled - No phonebook initialization.
Syntax:
Command syntax:
AT+WAIP=<mode>
Command
Possible responses
AT+WAIP=?
Note: Display valid command parameters.
+WAIP: (0-1)
OK
AT+WAIP?
Note: Display current WAIP setting.
+WAIP: 1
OK
Note: No phonebook commands are allowed. If
entered, “+CMEE ERROR: 3” is returned.
AT+WAIP=1
Note: Disable phonebook access.
OK
Note: Access is denied following module reset.
AT+WAIP=0
Note: Enable phonebook access.
OK
Note: Access is permitted following module reset.
Delete Calls From Phonebook +WDCP
Description:
This command will delete all entries from a selected phonebook if it supports this feature. Typically, +WDCP
is used to delete the calls stored in LD, MC, and RC phonebooks.
Values:
<call phonebook>
LD, MC, or RC
Syntax:
Command syntax:
AT+WDCP=”<call phonebook>”
Command
Possible Responses
AT+WDCP?
+WDCP: “LD”
Note: Returns phonebook(s) that support deleting calls.
AT+WDCP=?
+WDCP: (“LD”,”MC”,”RC”)
Note: Possible supported phonebooks
AT+WDCP=”LD”
OK
Note: Erase call history for last dialed phone book