Chapter 9 – Data Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)
55
Chapter 9 – Data Commands
Using AT Commands During a Data Connection
To use AT Commands during a data connection (e.g. while the product is in online mode), it is necessary either to switch to
offline mode, or to use the +WMUX command to enable Commands / Data multiplexing.
Note: currently the +WMUX command is not supported yet.
Switch From Online to Offline Mode +++
During a circuit data call, the “+++” command can be used to suspend the data call and switch from online mode to
offline mode. The “OK” response is returned when the modem has completed the transition to offline mode and is
ready to accept AT commands.
Note:
The “+++” sequence only works with the
+ICF
command using the following settings:
•
8 data bits, with no parity
•
7 data bits, with even parity
Switch From Offline to Online Mode
See the
ATO
command description.
Select Mode +FCLASS
Description:
This command puts the product into a particular operating mode for fax.
Values: <n>
0
Data
1
Fax class 1
2.0
Fax class 2.0
Syntax:
Command syntax:
AT+FCLASS= <n>
Command
Possible Responses
AT+FCLASS=?
Note: Test command
+FCLASS: 0, 2.0
OK
Note: If fax class 1 not supported
AT+FCLASS=0
Note: Data mode requested
OK
Note: Command valid
AT+FCLASS=2.0
Note: Fax class 2 mode requested
OK
Note: Command valid
AT+FCLASS?
Note: Current value
+FCLASS: 2.0
OK
Note: Command valid