manualshive.com logo in svg

Multitech MTCBA-C-IP-N1, Reference Manual, Page: 117 / 202

Share
Download
Multitech MTCBA-C-IP-N1 Reference Manual Download Page 117

Chapter 16 – Extended AT Commands in IS707.3 

 

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J) 

117 

 

Battery Charge  +CBC 

 

Description:

  

This command is used to query the current state of the modem power source. An estimate of the remaining 
capacity is included if a battery connection is in use. 

 

 

Values

:  

<BCS> 

Battery Charge Status: 

 

  

0 

Mobile powered by battery; followed by <BCL>, percent of battery remaining 

 

  

1 

Mobile connected to external power  

  

2 

Battery status not available  

  

3 

Recognized power fault. Calls inhibited. 

 

 <BCL> 

Battery Charge Level: 

 

 

  0 – 100 

Remaining battery capacity is 0 – 100%. 

 

 

Syntax:

  

Command syntax:

 AT+CBC  Read-only. Returns <BCS>,<BCL> 

 

Command 

 

Possible Responses 

 

AT+CBC? 

 

Note: Display the current status 

 

+CBC: 0, 77 

 

OK 

 

Note: Command is valid 

 

AT+CBC 

 

ERROR 

 

Note: Command is not valid 

 

 
 

Command State Inactivity Timer  +CQD 

 

Description:

  

The numeric parameter is used to query and set the Command State Inactivity Timer. 

 

 

Values:

  

<val>

 

 

  

0 

Ignored 

 

  

1-255 

 

Release call after 5x<val> seconds have elapsed without activity. 

 

 

Note:  

The default <val> shall be 10, corresponding to 50 seconds. 

 

 

Syntax:

  

Command syntax:

 AT+CQD=<val> 

 

Command 

 

Possible Responses 

 

AT+CQD? 

 

Note: Display the current setting. 

 

+CQD: 10 

 

OK 

 

Note: Command is valid 

 

AT+CQD=0 

 

Note: Set the value to 0. 

 

OK 

 

Note: Command is valid 

 

 
 

Mobile Station IP Address  +CMIP 

 

Description:

  

This read-only command is used to display the mobile station’s temporary IP address. The value displayed 
is in standard IP address format. 

 

 

Note: 

 

This command returns an IP value only during a data call when a temporary IP address has been assigned. 
When not in a data call, this command returns “OK”. 

 

 

Syntax:

  

Command syntax:

 AT+CMIP 

 

Command 

 

Possible Responses 

 

AT+CMIP? 

 

Note: Display the current setting 

 

+CMIP: 198.229.142.90 

 

OK 

 

Note: Command is valid 

 

AT+CMIP? 

 

Note: Display the current setting 

 

OK 

 

Note: When no IP address assigned. 

 

AT+CMIP 

 

ERROR 

 

Note: Command is not valid 

 

 

Summary of Contents for MTCBA-C-IP-N1











































































































































































































Reviews:

No comments