Chapter 15 – Provisioning AT Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)
102
Primary Browser Gateway +WBGP
Description:
This command is used to set the primary browser gateway IP address (Ipv4). If a browser is not natively
supported by the modem, this command will return ERROR.
Values:
<num>
0-255
Syntax:
Command syntax:
AT+WBGP=<num>,<num>,<num>,<num>
Command
Possible Responses
AT+WBGP?
Note: Get current gateway
+WBGP: 127,0,0,1
OK
AT+WBGP=255,255,255,0
Note: Set primary gateway to 255.255.255.0
OK
Secondary Browser Gateway +WBGS
Description:
This command is used to set the secondary browser gateway IP address (Ipv4). If a browser is not natively
supported by the modem, this command will return ERROR.
Values:
<num>
0-255
Syntax:
Command syntax:
AT+WBGS=< num >,< num >,< num >,< num >
Command
Possible Responses
AT+WBGS?
Note: Get current primary gateway
+WBGS: 127,0,0,1
OK
AT+WBGS=255,21,255,0
Note: Set secondary gateway to 255.21.255.0
OK
Packet Dial String +WPDS
Description:
This command is used to set the packet dial string.
Values:
<string>
A string of length 1 to 15 characters.
Syntax:
Command syntax:
AT+WPDS=<string>
Command
Possible Responses
AT+WPDS?
Note: Get current Packet Dial String
+WPDS: ”#777”
OK Note: Current Packet Dial String is #777
AT+WPDS=”#999”
Note: Set the Packet Dial String to #999
OK
Primary CDMA Channels +WPCC
Description:
This command is used to set the primary CDMA channels for 800Mhz CDMA operation only. Values entered
must be valid CDMA 800Mhz Channel numbers.
Values:
<channel a number>
Value range: 0 – 2047
<channel b number>
Value range: 0 – 2047
Syntax:
Command syntax:
AT+WPCC=<channel a number>,<channel b number>
Command
Possible Responses
AT+WPCC?
Note: Get current primary CDMA channels
+WPCC: 283,384
OK
AT+WPCC=211,432
Note: Set the primary CDMA channels
OK