manualshive.com logo in svg

Multitech MTCBA-C-IP-N1, Reference Manual, Page: 119 / 202

Share
Download
Multitech MTCBA-C-IP-N1 Reference Manual Download Page 119

Chapter 16 – Extended AT Commands in IS707.3 

 

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J) 

119 

 

Select Multiplex Option  +CMUX 

 

Description:

  

The numeric parameter is used to select multiplex option. This command is used to set the maximum 
number of multiplex options on the forward and reverse links for MDR calls. If a reverse parameter value is 
not specified, it is set to the forward parameter value. 

 

 

Values: 

 

<forward> 

 

Hexadecimal value: 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, F  

 

<n> 

 

  

1 

Multiplex Option 1 

 

  

2 

Multiplex Option 2 

 

 

Syntax:

  

Command syntax:

 AT+CMUX=<forward>,[<reverse>]

 

 

 

Command 

 

Possible Responses 

 

AT+CMUX? 

 

Note: Display the current setting. 

 

+CMUX: C, 2 

 

OK 

 

Note: Command is valid 

 

AT+CMUX=? 

 

Note: Display valid parameter range. 

 

+CMUX: (1-9,A-D,F), (1,2) 

 

OK 

 

Note: Command is valid 

 

AT+CMUX=1 

 

Note: Set multiplex option 1. 

 

OK 

 

Note: Command is valid 

 

 

U

m

 Interface Fax Compression  +CFC 

 

Description:

 

 

The numeric parameter is used to set the U

m

 Interface Fax Compression

.

 

 

 

Values:  

<Val> 

 

  

0 

No compression 

 

  

1 

V.42bis compression with parameters as set by the +CDS command. Currently, not supported.

 

  

2 

Modified Read compression. Currently, not supported.

 

 

 

Syntax:

  

Command syntax:

 AT+CFC=<Val> 

 

Command 

 

Possible Responses 

 

AT+CFC? 

 

Note: Display the current setting. 

 

+CFC: 0 

 

OK 

 

Note: Command is valid 

AT+CFC=? 

 

Note: Display the range of the setting. 

 

+CFC: (0-2) 

 

OK 

 

Note: Command is valid 

AT+CFC=0 

 

Note: Set no compression. 

 

OK 

 

Note: Command is valid 

 
 

Hang-up Voice  +CHV 

 

Description:

  

The numeric parameter is used to Hang-up a voice call. It terminates a voice connection previously 
established up +CDV (dial voice) or $QCCAV (answer voice). The only valid parameter is zero, which is 
optional. 

 

 

Values: 

 

<n> 

 

  

0 

Hang-up voice call 

 

  

1-255 

Reserved. 

 

 

Syntax:

  

Command syntax:

 AT+CHV<n> 

 

Command 

 

Possible Responses 

 

AT+CHV 

 

Note: Display the current setting. 

 

OK 

 

Note: Command is valid 

 

AT+CHV0 

 

Note: Hang up the call. 

 

OK 

 

Note: Command is valid 

 

 

Summary of Contents for MTCBA-C-IP-N1











































































































































































































Reviews:

No comments