manualshive.com logo in svg

Multitech MTCBA-C-IP-N1, Reference Manual, Page: 38 / 202

Share
Download
Multitech MTCBA-C-IP-N1 Reference Manual Download Page 38

Chapter 6 – SIM Card Operational Commands 

 

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J) 

38 

 

Change Password  +CPWD 

 

Description:

 

 

This command is used by the application to change a password, PIN1or PIN2. The “SC” and “P2” facilities 
are available only in builds, which include UIM support. 

 

 

Values:

 

 

<fac>

 

 

“SC” 

PIN1 

 

“P2”

 7.6.2 

PIN2 

 

 

<oldpwd> 

 

Current PIN1 or PIN2 password 

 

<newpwd> 

 

Desired PIN1 or PIN2 password  

 

Syntax:

 

 

Command syntax:

 AT+CPWD= <fac>, <oldpwd>, <newpwd>  

Command 

 

Possible Responses 

 

AT+CPWD=”SC”,1234,5555 

 

Note: Change UIM PIN1 

 

OK 

 

Note: PIN1 now 5555 

 

AT+CPWD=”SC”,1234,5555 

 

Note: Change UIM PIN1 

 

+CME ERROR: 16 

 

Note: PIN incorrect 

 

AT+CPWD? 

 

Note: Get status 

 

+CPWD:(“SC”,8),(“P2”,8) 

 

OK 

 

Note: PIN1 & PIN2 passwords are supported with 8 digit maximum 

 

 
 

Card Identification  +CCID 

 

Description:

 

 

This command is used to display the SIM card ESN. The data is output in hexadecimal format. If there is no 
ESN present on the SIM card, only the OK portion of the message will be output. 

 

 

Syntax:

 

 

Command syntax:

 AT+CCID 

 

Command 

 

Possible Responses 

 

AT+CCID 

 

Note: Get card ID 

 

+CCID: C3729F82 

 

Note: ESN is presented in hexadecimal format. 

 

AT+CCID? 

 

Note: Get current value 

 

+CCID: C3729F82 

 

Note: Same result as +CCID 

 

AT+CCID=? 

 

Note: Get possible value 

 

OK 

 

Note: No parameter but this command is valid. 

 

 

Summary of Contents for MTCBA-C-IP-N1











































































































































































































Reviews:

No comments