manualshive.com logo in svg

Multitech MTCBA-C-IP-N1, Reference Manual, Page: 181 / 202

Share
Download
Multitech MTCBA-C-IP-N1 Reference Manual Download Page 181

Chapter 23 – Verizon® Specific AT Commands 

 

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J) 

181 

 

Roaming Indication  +WROM 

 

Description

:  

This response indicates that the roaming status has changed. 

 

Values: <roam> 

 

  

0 

Roam Icon On (affiliated network) 

 

  

1 

Roam Icon Off (Home) 

 

  

2 

Roam Icon Blink (foreign network)  

 

The following values apply to enhanced roaming: 

 

  

3 

Out of Neighborhood  

  

4 

Out of Building  

  

5 

Roaming - Preferred System  

  

6 

Roaming - Available System  

  

7 

Roaming - Alliance Partner  

  

8 

Roaming - Premium Partner  

  

9 

Roaming - Full Service Functionality  

  

10 

Roaming - Partial Service Functionality  

  

11 

Roaming Banner On  

  

12 

Roaming Banner Off  

 

  13 – 63 

Reserved for Standard Enhanced Roaming Indicator Numbers  

 

  64 – 93 

Enhanced Roaming Indicator (+WERI response)  

 

  94 – 255 

Reserved 

 

Syntax:

  

Response Syntax:

 +WROM: <roam> 

 

Possible Responses 

 

+WROM:1 

 

 

Enhanced Roaming Indication  +WERI 

 

Description:

  

This response indicates that the enhanced roaming status has changed. 

 

Values: <indicator> 

 

  

64-93 

Index number identifying the roaming indicator entry. 

 

 

<icon image> 

 

  

0-15 

Verizon®. defined value that specifies the Icon Image that is displayed. 

 

 

<icon mode> 

 

  

0-3 

Verizon®. defined value that specifies how the Icon Image is displayed (On, Off, Flashing). 

 

 

<call prompt> 

 

  

0-3 

Verizon®. defined value that identifies the Call Prompt that is displayed for each roaming 
indicator. This field is set to a value of ZERO when no call prompt is used. Note that this field is 
currently not implemented in the Verizon®. user interface specs. It may be used in the future. 

 

 

<alert/call id> 

 

  

0-7 

Verizon®. defined value that identifies the Alert Sound that is used for the indicator. The value in 
this field reflects the ID of the Alert Sound that the mobile annunciates to the end user. 

 

 

<chari type> 

 

  

0-31 

Character Encoding Type (Ref TSB58E table 9.1-1). Identifies the character code table used for 
the 

<text> 

field. (Usually set to 2.) 

 

Type 

 

Bit Length 

 

Character Encoding 

 

0 

 

8 

 

Octet, unspecified 

 

1 

 

see IS-91 

 

IS-91 Extended Protocol Message 

 

2 

 

7 

 

7-bit ASCII (ANSI x3.4) 

 

3 

 

7 

 

IA5 (Table 11 of ITU-T T.50) 

 

4 

 

16 

 

UNICODE (ISO/IEC 10646-1:1993) 

 

5 

 

8 or 16 

 

Shift-JIS 

 

6 

 

8 or 16 

 

Korean (KS x 1001:1998) 

 

7 

 

8 

 

Latin/Hebrew (ISO 8859-8:1988) 

 

8 

 

8 

 

Latin (ISO 8859-8:1988) 

 

9 

 

7 

 

GSM 7-bit default alphabet 

 

10-31 

 

x 

 

Reserved 

 

 <text> 

 

Verizon® defined variable length field that contains the text data used for the banner. The text 

format is specified in the Character Encoding Type. Text field limit: 32 character max length.  

Syntax:

  

Response Syntax:

 +WERI: <indicator>, <icon image>, <icon mode>, <call prompt>, <alert/call id>, <chari 

type>, <text> 

 

Command 

 

Possible Responses 

 

Note: Example of acquiring service with 
enhanced roaming. 

 

+WERI: 69,2,0,0,4,2,”Extended Network” 

 

+WROM:2 

 

Note: Both +WERI and +WROM responses. 

 

Note: Example of acquiring service without 
enhanced roaming. 

 

+WROM:1 

 

Note: No +WERI response. 

 

 

Summary of Contents for MTCBA-C-IP-N1











































































































































































































Reviews:

No comments