Multitech MTCBA-C-IP-N1 Reference Manual Download Page 178

Page: 178 / 202

Chapter 22 – AT Command Examples

Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)

178

UDP Connection, DNS Lookup, Unsolicited Received Data

AT+WCRX=1,1

Set UDP receive mode; unsolicited received data.

AT+WPPP=1,user,password

Start a SIP data call and open a PPP session.

+WPPP: 201

Unsolicited response; PPP session startup in progress.

+WPPP: 200

Unsolicited response; PPP session established and available.

AT+WGSS=1

Display UDP connection status.

+WGSS: 1,2,1,0,0,0,0

UDP status, PPPstate “open”, RxMode “Unsolicited”, All sockets “closed”.

AT+WDNS=”www.myurl.org"

Look up IP address on DNS server.

…

+WDNS: 0

Unsolicited response; Communication with DNS server completed.

AT+WDNS=”www.myurl.org”

Display DNS server lookup result.

+WDNS : 216.37.68.117

IP address of ”www.myurl.org".

AT+WOSK=1,216,37,68,117,250

Open a UDP socket to IP address 216.37.68.117 port 250.

+WOSK: 1,0

UDP socket zero allocated.

+WSKS: 1,0,1

Unsolicited response; UDP socket zero is open.

AT+WGSS=1

Display UDP connection status.

+WGSS: 1,2,1,2,0,0,0

UDP status, PPPstate “open”, RxMode “Unsolicited”, Socket zero “open”.

AT+WSTX=1,0,5,<cr>HELLO

Send HELLO to UDP socket zero.

+WSTX: 1,0,5

Unsolicited response; Five bytes transmitted on UDP socket zero.

…

+WSRX: 1,0,5:WORLD

Unsolicited response; 5 bytes of data received on UDP socket zero.

“WORLD”

AT+WCSK=1,0

Close UDP socket zero.

+WSKS: 1,0,4

Unsolicited response; UDP socket zero is closed.

AT+WGSS=1

Display UDP connection status.

+WGSS: 1,2,1,0,0,0,0

UDP status, PPPstate “open”, RxMode “Unsolicited”, Socket zero “closed”.

AT+WPPP=2

Close the PPP session and end the data call.

+WPPP: 203

Unsolicited response; PPP session shutdown in progress.

+WPPP: 202

Unsolicited response; PPP session closed.

UDP Connection, Blocked Data Transmission

AT+WPPP=0

Start a MIP data call and open a PPP session.

+WPPP: 201

Unsolicited response; PPP session startup in progress.

+WPPP: 200

Unsolicited response; PPP session established and available.

AT+WOSK=1,216,37,68,117,250

Open a UDP socket to IP address 216.37.68.117 port 250.

+WOSK: 1,0

UDP socket zero allocated.

+WSKS: 1,0,1

Unsolicited response; UDP socket zero is open.

AT+WGSS=1

Display UDP connection status.

+WGSS: 1,2,1,2,0,0,0

UDP status, PPPstate “open”, RxMode “Unsolicited”, Socket zero “open”.

AT+WSTX=1,0,500,<data>

Send 500 bytes of data on UDP socket zero.

+WSTX: 1,0,500

Unsolicited response; 500 bytes transmitted on UDP socket zero.

…

Other +WSTX commands and +WSTX responses for data transfers.

AT+WSTX=1,0,500,<data>

Send 500 bytes of data on UDP socket zero.

+CME ERROR : 3

+WSTE: 1,0,102

Blocked data transmission on UDP socket zero.

AT+WGSS=1

Display UDP connection status.

+WGSS: 1,2,1,2,0,0,0

UDP status: PPPstate “open” and Socket zero “open”. Blocking condition due

to full socket buffer.

…

+WSKS: 1,0,1

UDP socket zero available for data transmission.

AT+WSTX=1,0,500,<data>

Resend the failed 500 bytes of data on UDP socket zero.

+WSTX: 0,500

Unsolicited response; resend good. 500 bytes transmitted on UDP socket zero.

Summary of Contents for MTCBA-C-IP-N1











































































































































































































Search results

Summary of Contents for MTCBA-C-IP-N1

Reviews:

Multitech MTCBA-C-IP-N1, Reference Manual, Page: 178 / 202

Search results

Summary of Contents for MTCBA-C-IP-N1

Reviews: