Moxa Technologies ioLogik E2210, User Manual

Page: 104 / 144

ioLogik E2200 Series Using the Web Console
5-2
Introduction to the Web Console
The ioLogik web console is a browser-based configuration utility. When the ioLogik is connected to your
network, you may enter the server’s IP address in your web browser to access the web console.
The left panel is the navigation panel and contains an expandable menu tree for navigating among the various
settings and categories. When you click on a menu item in the navigation panel, the main window will display
the corresponding options for that item. Configuration changes can then be made in the main window. For
example, if you click on Network Settings in the navigation panel, the main window will show a page of basic
settings that you can configure.
You must click on the Submit button after making configuration changes. The Submit button will be located
at the bottom of every page that has configurable settings. If you navigate to another page without clicking the
Submit button, your changes will not be retained.
Submitted changes will not take effect until they are saved and the ioLogik is restarted! You may
save and restart the server in one step by clicking on the Save/Restart button after you submit a change. If
you need to make several changes before restarting, you may save your changes without restarting by
selecting Save/Restart in the navigation panel. If you restart the ioLogik without saving your configuration,
the ioLogik will discard all submitted changes.
1. Overview
2. Basic Settings
3. Network Settings
4. I/O Setting
5. System Management
6. LCM
7. Change Password
8. Load Factory Default
9. Save/Restart
NOTE The web console is best viewed with Internet Explorer 9 or higher; some functionality may not be supported
when using other browsers.